1968 Ford Mustang Fastback GT500E “Eleanor”
This is a REAL 1968 Fastback with Vin#8R02J125394. It was built to be full show and go, incorporating all of the best old and new technology. This build started from a VERY solid and real 68 V8 Fastback. The final build is very fresh, only having about 60 miles on the engine. The car has been detailed inside and out and underneath to be appealing everywhere you look. From the REAL 428 Cobra Jet to the GT interior to the adjustable suspension, it has it ALL.

The below list shows the extensive build that went into completing this project:

EXTERIOR:

The iconic gray and black paint combo shines over the this 68 Fastback. The fiberglass hood is a slight variation in style from your normal build but adds a ton of character to the front. Billet hood pins hold the hood down. Unlike other builds, you will find REAL working upper side scoops that feed into the rear seat vents. Also, the lower scoops add depth by having real “pockets” and not a flat finished surface. The LeMans gas fill is real and working. All brake, turn, reverse, and fog bulbs are LED (except headlights to keep old “yellow” light look).

ENGINE and ENGINE BAY:

Engine was just professionally balanced and assembled. Super clean and detailed from top to bottom. Engine bay has the shock towers removed. All wiring has been relocated and hidden. All holes were filled and smoothed to create an area for the engine to be the spotlight. This includes the color matched matte finish engine bay and stripes down the firewall. The heater motor and hoses were also deleted for a cleaner look.

428 CJ Block (.030 over) Date Code: 9B7 (Has the “C” scratch in block casting)
428 CJ Heads #C80E6080-N Date Codes:8C13/8C22
428 CJ Crank #1UB
428 CJ Intake #C80E9425-C Date Code:9B11
428 CJ Front Cover
428 Fuel pump #C8AE6881-A
428 Oil Filter Housing #C8AE6881-A
SCAT H Beam rods
TRW Pistons
HV Melling Oil Pump
427 Adjustable Rocker Arms
Lunati Springs/Retainers/Locks
Lunati Cam 10330505
Double timing chain
All ARP studs and fasteners including rocker stud kit
Canton Deep Race Oil Pan
428 Custom Painted Valve Covers
Holley 750 4150 Race Carb (all mechanical)
Doug Long Tube Headers
High torque mini starter
MSD 6ALN Distributor and Box (hidden in glove box)
MSD 8.5mm Wires
March Billet Pulley System
Chrome Alternator
Dual electric fans
Aluminum radiator with polished overflow tank
Lokar Dip Stick
Custom front cover to hide the void behind the billet grille…..

Blairstown, New Jersey, United States